Serving the Visalia area  ·  (559) 372-4538  ·  Open Mon-Sun 7am-7pm
📞 (559) 372-4538 Free Quote

Metal Roofing in Lindsay, CA (93247) · Local Professionals

Visalia Metal Roofing · Fast response in Lindsay and the Visalia area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+295Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lindsay is a citrus town where most of the roofs sit on modest bungalows, ranch homes, and packing sheds that have seen decades of hot valley summers. If you live near Sweet Brier Plaza or up toward the foothills on the east side, you know how fast the sun can cook an old shingle roof.

Homeowners in Lindsay (93247) call Visalia Metal Roofing because we understand the local building stock: the older homes with low-pitch roofs, the farm buildings among the orange groves, and the newer stucco houses that need a roof that reflects heat instead of soaking it up. We are based in Visalia and serve Lindsay and the surrounding area, and we know the specific challenges that come with roofing here.

Metal Roofing in Lindsay (93247)

Lindsay sits on the flat San Joaquin Valley floor, on deep sandy loam that drains quickly but can shift slightly with irrigation and seasonal moisture. The housing mix includes early 1900s Craftsman bungalows and Spanish Revival cottages near downtown, 1950s to 70s stucco ranches with wide eaves, and newer two-story subdivision homes on the west side. Many properties have detached garages, carports, or shop buildings, and the lots are often long and narrow with mature citrus or olive trees close to the roofline. That means access can be tight, and falling limbs are a real concern. The intense UV and 100-degree summers break down shingles and dry out sealants, while winter tule fog and occasional heavy storms test flashing and fasteners. We have seen plenty of wind-lifted panels and active leaks from failed fasteners on older metal roofs around town. Our team has worked on everything from small bungalow re-roofs to large agricultural buildings, and we know how to handle the local conditions without cutting corners.

Our services in Lindsay

How a Job Works in Lindsay

Step 1: You call us at (559) 372-4538 or request a free estimate online. We schedule a time to come out and inspect your roof, whether it is a home near Lindsay City Park or a packing shed off Road 196. We look at the roof structure, existing layers, flashing, and any signs of leaks or damage. You get a written estimate with clear pricing and options, no pressure.

Step 2: Once you approve the scope, we pull the necessary permits with the City of Lindsay building department. We coordinate delivery and staging to work around your schedule and any access issues, like narrow driveways or trees close to the house. Our crew removes the old roofing, inspects the decking, and installs the new metal roof according to the manufacturer's specs. We keep the site secure and tidy each day.

Step 3: After the install, we do a thorough cleanup, including magnet sweeps for nails and debris removal. We walk the finished roof with you, show you the work, and make sure you are satisfied before we consider the job done. We leave your property clean and ready to enjoy.

Pricing for metal roofing in Lindsay depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Smaller repairs, like fixing a leak or replacing flashing, typically start around $450, while a full re-fastening job starts at $750. For agricultural or commercial buildings, we provide free estimates tailored to the project. The best way to get an accurate number is to call us at (559) 372-4538 for a free on-site assessment. We will give you a straightforward quote with no surprises.

My roof is original to a 1920s bungalow near downtown Lindsay. Can you match the look with metal?
Yes, we can. Many older homes in Lindsay have low-pitch roofs and visible architectural details. We offer metal shingle and stone-coated steel profiles that mimic the look of traditional shingles or tile while giving you the durability of metal. We will bring samples so you can see how they fit the character of your home.
A windstorm just peeled back some panels on my roof in Lindsay. How fast can you respond?
We prioritize storm damage calls. Call us at (559) 372-4538 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the area to prevent further damage and provide a written estimate for permanent repairs.
What is the typical cost to replace a shingle roof with metal on a 1,500-square-foot home in Lindsay?
For a basic corrugated or ribbed panel roof, you might be looking at around $5.50 to $8 per square foot installed, so roughly $8,000 to $12,000 for 1,500 square feet, depending on removal, decking condition, and accessories. Standing seam or stone-coated steel will be higher. We give free estimates to pin down the exact cost for your home.
Do I need a permit to install a metal roof in Lindsay, and how long does it take?
Yes, roofing permits are typically required for a full replacement or re-roof in Lindsay. The City of Lindsay Building Department handles permits, and turnaround times vary. We handle the permit application and inspections for you, and we will let you know the expected timeline before we start.
My neighbor says my new roof panels might cross the property line. What should I do?
Before installation, we review the property lines and setbacks. If there is any question, we recommend having a survey done. We also work with HOA requirements if your neighborhood has design review. We will make sure the installation respects property lines and any HOA rules.
Are you insured for roofing work at my Lindsay property?
Yes, we are fully insured with general liability and workers' compensation coverage. You can have peace of mind knowing our team is covered while working on your roof.
What maintenance does a metal roof need in Lindsay's climate?
Metal roofs are low maintenance, but in Lindsay's dusty, hot environment, we recommend an annual inspection to check for loose fasteners, debris buildup, and sealant wear. Cleaning gutters and removing debris from valleys and around flashing helps prevent leaks. If you have trees close by, trim them back to avoid scratching the finish. A coating can also extend the life of an older metal roof.
Why choose us?

Trusted professionals in Visalia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Visalia

All your work handled by qualified professionals in Visalia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

295+ Verified Client Reviews in Visalia

⭐⭐⭐⭐⭐ 4.9/5 · 295 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Visalia · Response within 24h · No commitment · ☎ (559) 372-4538

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Visalia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm