Serving the Visalia area  ·  (559) 372-4538  ·  Open Mon-Sun 7am-7pm
📞 (559) 372-4538 Free Quote

Metal Roofing in Visalia, CA (93277) · Local Professionals

Visalia Metal Roofing · Fast response in Visalia and the Visalia area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+295Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Visalia's older neighborhoods tell the story of the valley: Craftsman bungalows and Spanish Revival homes around Oval Park and downtown, wide-eaved 1960s ranches out toward Mooney Grove, and newer two-story stucco subdivisions across North and West Visalia. Those roofs take a beating from 100-degree summers, intense UV, tule fog, and spring winds that peel panels loose.

We're Visalia Metal Roofing, and we work these streets every week. From a standing seam retrofit on a ranch house near Mooney Grove to a leak repair on a bungalow off Court Street, we know how this valley treats a roof, and we build for it. Licensed and fully insured, serving Visalia and the surrounding area.

Metal Roofing in Visalia (93277)

The flat San Joaquin Valley floor here means sandy loam underfoot and drainage that has to be managed carefully, especially on the older lots where the ground has settled around foundations. Around Oval Park and downtown, the 1900s to 1930s bungalows and Victorian cottages often have low-pitched shingle roofs and tight side yards, so panel staging and ladder access take planning. The 1950s to 1970s stucco and brick ranches across the older east and south neighborhoods have wide eaves and carports that make retrofit work straightforward, but their original decking is often soft after decades of dry heat. Out in the orchards around Exeter, Lindsay, Farmersville, and Woodlake, farmhouses, dairy buildings, and packing houses need heavier-duty R-panel and standing seam systems that stand up to dust, sun, and equipment traffic. And across North and West Visalia, the 1990s to 2020s subdivisions with concrete tile and composition roofs are prime candidates for stone-coated steel or standing seam, which reflects heat and cuts cooling costs.

Our team has installed, repaired, and replaced metal roofs across all of these property types. We know which fasteners hold in valley heat, how to detail flashing around chimneys and skylights on older homes, and how to keep a job clean when the lot is tight and the neighbors are close.

Our services in Visalia

How a Job Works in Visalia

Step 1: You call us at (559) 372-4538 or request a free estimate online. We schedule an on-site assessment, walk your roof and attic, check fasteners, seams, flashing, and decking, and talk through your options. You get a written estimate with clear pricing, no pressure, and answers to your questions about materials, timeline, and permits.

Step 2: We handle the work. For most Visalia jobs, that means pulling the required roofing permit through the City of Visalia, coordinating with your HOA if you're in a subdivision with design review, and scheduling around weather. On tight lots near downtown or in older neighborhoods, we stage materials carefully and protect landscaping. We keep you informed at every step, and we don't leave your roof open to the weather overnight.

Step 3: Cleanup and final walkthrough. We magnet-sweep for nails, haul away old materials, and walk the finished job with you. We leave your property clean and your roof ready for the next 40 years of Visalia sun.

Pricing in Visalia depends on roof size, pitch, access, decking condition, and the material you choose. For a typical single-story ranch or bungalow, metal roof installation starts around $8 per square foot, standing seam from $10, and metal roof replacement from $9. If you're retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot, subject to code limits on layers. Corrugated and ribbed panel roofing starts at $5.50, stone-coated steel and metal shingle roofing from $9, and copper or specialty metal from $20. Repairs start at $450, leak repairs at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs run from $9 per linear foot. Storm and wind damage inspections are free. Call (559) 372-4538 for a free estimate tailored to your property.

My 1960s ranch near Mooney Grove has wide eaves and original decking. Can you install a metal roof over it?
Yes, in many cases. We inspect the decking first. If it's sound, a retrofit over existing shingles can work, but code limits how many layers you can have. If the decking is soft or damaged from years of valley heat, we'll recommend a tear-off and new underlayment. We'll give you a clear recommendation after the free inspection.
A spring windstorm peeled back panels on my roof in Visalia. How fast can you respond?
We prioritize active leaks and storm damage. Call (559) 372-4538 and we'll schedule an inspection as soon as possible, often within a day or two depending on demand. We can tarp or secure the roof to prevent further damage, then provide a written repair estimate.
What does a typical metal roof replacement cost in Visalia?
For a standard single-story home, most replacements fall between $9 and $14 per square foot installed, depending on material, roof complexity, and whether we tear off the old roof. Standing seam runs higher, from $10 per square foot. We provide a free estimate with line-item pricing so you know exactly what you're paying for.
Do I need a permit for a metal roof in Visalia?
Yes, a full replacement or re-roof typically requires a permit, and requirements vary by jurisdiction. We handle the permit application and inspections for you. For details on local rules, check the City of Visalia website at https://www.visalia.city/ or call the building department directly.
My HOA requires approval for roof color and profile. Can you help with that?
Yes. We work with HOAs across North and West Visalia regularly. We can provide product specifications, color samples, and installation details for your HOA's design review. If there's a property line question with a neighbor, we follow local setback rules and can coordinate access as needed.
Are you insured for work on my Visalia property?
Yes, we are fully insured with general liability and workers' compensation coverage. You can have confidence that your property and our crew are protected.
What maintenance does a metal roof need in Visalia's climate?
Inspect fasteners and seams annually, especially after spring winds. Clear debris from valleys and gutters before winter rains. Tule fog and damp mornings can hide small leaks, so check attic insulation for moisture stains. A coating every 10 to 15 years can extend the life of painted panels under our intense UV.
Why choose us?

Trusted professionals in Visalia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Visalia

All your work handled by qualified professionals in Visalia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

295+ Verified Client Reviews in Visalia

⭐⭐⭐⭐⭐ 4.9/5 · 295 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Visalia · Response within 24h · No commitment · ☎ (559) 372-4538

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Visalia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm