Serving the Visalia area  ·  (559) 372-4538  ·  Open Mon-Sun 7am-7pm
📞 (559) 372-4538 Free Quote

Metal Roofing in Tulare, CA (93274) · Local Professionals

Visalia Metal Roofing · Fast response in Tulare and the Visalia area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+295Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Tulare is dairy country and old downtown bungalows, all spread across the flat valley floor along Highway 99. The housing stock here runs from 1920s Craftsman cottages near the downtown core to 1990s stucco subdivisions out toward the high school, and each one takes a beating from 100-degree summers and winter tule fog.

We're Visalia Metal Roofing, and we serve Tulare (93274) because it's a short drive down 99 and we know the local building stock. Whether you're near the Tulare Historical Museum or out on the dairy roads west of town, we've worked on roofs like yours.

Metal Roofing in Tulare (93274)

Tulare sits on deep sandy loam, which drains fast but shifts slightly under older homes, so flashing and fastener placement matter more than on solid clay. The older bungalows near downtown often have low-pitch roofs with wide eaves and carports, and those wide eaves can make ladder access tricky. Newer subdivisions off Prosperity Avenue have concrete tile or composition shingles that are reaching the end of their life, and homeowners there are switching to standing seam or stone-coated steel to cut cooling costs. Out on the dairy and farm properties west and south of town, we see a lot of metal shops and packing houses that need agricultural metal roofing with heavy-duty fasteners and snow guards where equipment or hay storage demands it.

Our team has been working in Tulare and the surrounding Visalia area for years, and we understand how the valley heat, dust, and winter fog affect different roof types. We know which panels handle the expansion and contraction from 100-degree days and which coatings hold up to UV without fading.

Our services in Tulare

How a Job Works in Tulare

Step 1: Call us at (559) 372-4538 or request a free estimate online. We'll schedule a time to come out to your Tulare property, inspect the roof, and talk through options. No pressure, no sales pitch, just a straight assessment of what your roof needs.

Step 2: Once you approve the estimate, we pull the required permits from the City of Tulare building department. For older homes near downtown, we check for historic district or HOA design review if applicable. Then our crew gets to work, staging materials carefully on tight lots and protecting your landscaping. Most residential re-roofs take a few days, depending on weather and roof complexity.

Step 3: We clean up thoroughly, haul away all old materials, and walk the finished roof with you. We make sure you know how the new system works and that everything meets our standards before we call the job done.

Metal roofing in Tulare runs from about $5.50 per square foot for corrugated panels up to $20 or more for copper or specialty metals. A typical 1,500-square-foot ranch home might need a metal roof replacement starting around $9 per square foot, while a standing seam system starts at $10 per square foot. Repair jobs like leak fixes or flashing repairs start at $450. The final price depends on roof size, pitch, access, whether we're going over existing shingles or tearing off, and how soon you need it done. Call (559) 372-4538 for a free estimate tailored to your property.

My 1950s ranch near Mooney Grove has wide eaves and a low-pitch roof. Can you install metal over the existing shingles?
Yes, we can often do a metal roof over shingles (retrofit) if your roof structure and local code allow it. The low pitch and wide eaves are common in that area, and we'll check that the existing shingles are in good enough condition to serve as a base. We'll also verify the number of layers, since Tulare code limits how many layers you can have. If a tear-off is needed, we'll explain why.
A storm just blew some panels loose on my dairy barn west of Tulare. How fast can you get out there?
We prioritize storm and wind damage repairs in Tulare and the surrounding area. Call us at (559) 372-4538 and we'll schedule a free inspection as soon as possible, often within 24 to 48 hours depending on demand. We'll secure the roof to prevent further damage and give you a repair estimate on the spot.
What's a realistic budget for a metal roof replacement on a 1,200-square-foot home in Tulare?
For a basic corrugated or ribbed panel roof, you might start around $5.50 per square foot, so materials and labor could be in the $6,600 to $10,000 range depending on removal and disposal. Standing seam or stone-coated steel runs higher, often $10 to $12 per square foot installed. We'll give you a firm quote after inspecting your roof.
Do I need a permit from the City of Tulare for a metal roof replacement?
Yes, a building permit is typically required for a full roof replacement in Tulare. The exact requirements and fees vary, so we always confirm with the City of Tulare building department before starting work. We handle the permit application and inspections for you, so you don't have to worry about the paperwork.
My neighbor and I share a property line, and my new metal roof might overhang slightly. What are the rules?
In California, roof overhangs can cross property lines in some cases, but it's best to check with the City of Tulare planning department and review your property survey. If you're in an HOA, they may have additional rules about roof style and color. We can help you understand the requirements and coordinate with your neighbor if needed.
Are you fully insured for work on my Tulare property?
Yes, we carry general liability insurance and workers' compensation coverage for all our crew members. We're happy to provide a certificate of insurance upon request so you can verify our coverage before we start.
What maintenance does a metal roof need in Tulare's climate?
Metal roofs are low-maintenance, but in Tulare's dusty, hot environment, we recommend an annual inspection to check fasteners, clear debris from valleys and gutters, and look for any signs of wear. Coating or painting every 10 to 15 years can extend the life of the finish. We offer free inspections to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Visalia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Visalia

All your work handled by qualified professionals in Visalia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

295+ Verified Client Reviews in Visalia

⭐⭐⭐⭐⭐ 4.9/5 · 295 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Visalia · Response within 24h · No commitment · ☎ (559) 372-4538

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Visalia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm